Ambient TV Backlight LED Sync to Screen 4K for 40-85 In | TV & Project

Ambient TV Backlight LED Sync to Screen 4K for 40-85 Inch Real-Time Sync LED Light Strip for HDMI-Compatible 2.0 PS5 XBOX SWITCH

$131.95 $178.95

Emitting Color 40-50 inch for UK 75-85 inch for EU 55-65 inch for EU 40-50 inch for EU 75-85 inch for UK 55-65 inch for UK 75-85 inch for US 55-65 inch for US 40-50 inch for US

Note:

◑ This product cannot be directly connected to a TV and can only be connected to HDMI 2.0 interface TV boxes, PS5, Xbox, Switch gaming devices, etc.

◑ Excluding televisions and other devices, only TV atmosphere light strips and synchronization boxes and accessories.

◑ It is not possible to use it alone with a smart TV.

◑ When installing the light strip, please install it upwards from the bottom left corner of the back of the TV, and then stick it along the edge of the TV.

FAQ：

1. lf the light strip does not light up or a section does notlight up, confirm whether the connection is correct. lf theconnection is correct, press and hold the Reset button ofthe control box for 5 seconds, and when the light stripflashes red, disconnect the power supply of the controller,and then reconnect the power supply. (As shown in the picture)

About it item:

Our Ambient TV Led Backlight is easy to operate, plug and play, and does not require WiFi or APP operation.Smart TV cannot be used alone with TV light strips,It requires an HDMI-Compatible 2.0 input source device to be used with this light strip, Such as For TV box, game console, laptop, PS4/PS5, etc. (Note: it does not support HDMI-Compatible 2.1).If you are not sure if your input source device is compatible with our light strip device, please contact our online customer service before purchasing, and we will reply to you within 24 hours.

How to solve the issue of the backlight strip being half lit and half dark?

① Press and hold the reset button on the controller for 5 seconds. The strip should then flash red.

② After the red flash, unplug the power and wait for 10 seconds.

③ Reconnect the power. The strip will run a cycle of white light to test if all parts are functioning correctly. During this cycle, observe the previously unlit section to see if it begins to light up. If this section lights up normally, it indicates that there are no hardware faults with the strip, and it can continue to be used.

Feature：

○ Increase heat dissipation holes, reduce heat generation, and prolong service life

○ Sampling the latest AI chips for more accurate color selection and solving flicker problems

○ No need for APP and WiFi operation, convenient for installation

○ Using AI technology for more precise synchronization without the need for manual operation

○ Lamp strip PU waterproof design, waterproof and moisture-proof

Specification:

Material: ABS

Light strip color: Black

Control box color: Black

Style: 40-75 inch version

Size: As shown in the picture

Weight: 510-710g

Input power supply: 12V/2A

Driver color order: RGB

Maximum number of light points per channel: 150 pixels

Control box size: 106 * 94.5 * 19mm

HDMI: HDMI 2.0 (not compatible with HDMI 2.1 and later versions)

Support: HDCP 2.2 Video resolution

Support: 4K@60Hz HDR 10+

HDCP: HDCP2.2 (Unable to support versions 2.3 and later)

Adapter: 24W power supply, 12V/2A (European/American standard optional)

Light strip: DC12V, 5050RGB, 30 lights/meter

Drip glue (PU) waterproof, with a 1.2-meter wire on one side

HDMI cable: 1.5 meters, HDMI 2.0, 1PCS

Light strip chip: WS2811

The package includes:

1x light strip (40-50 inch: 2.8 meters/55-70 inch: 3.8 meters/75-85 inch:5 meters)

1x synchronous control box

1x HDMI cable 1.5 meters

6x Connection Clamp

1x instruction manual

Easy lnstallation:

1.clean the back of the TV
2.Peel off the adhesive backing Of the light strip
3.Fix at the four corners on the back of the TV
4.Stick it to the back of the TV following the diagram/instructions.